Tango Distribution

Product Description

Tango Products-01

Tango LED with Distribution Types II, III & IV


LED luminaires available with up and downward light distributions (depending on fixture type). The Tango is unique as it is available with Type II, III, IV & V light distribution options that facilitates wider spacing and even lighting distribution between the light fixtures. This provides higher energy savings and reduced installation costs. The up-down version can be manufactured with customer specified distributions in color temp and beam spread.

Product features

    • High performing luminaire for a competitive value
    • Highly efficient optics provides excellent illumination uniformity
    • Flexibility in customizing product for specific needs
    • Available as a wall, ceiling, pendant mount or post top
    • Square or cylindrical design
    • Easy to install and maintain
    • LED color temps - 2700K, 3000K & 4000K
    • Optimized to improve energy efficiency, light quality and reliability
    • Multiple wattages available
    • Marine grade low copper content aluminum housing standard

 

Distributions

Type II Distribution

Type II-01The type II distribution is used for wide walkways, on ramps and entrance roadways, as well as other long, narrow lighting. This type is meant for lighting larger areas and usually is located near the roadside or pathways. You'll find this type of lighting mostly on smaller side streets or jogging paths. 

Type II light distributions have a preferred lateral width of 25 degrees. They are generally applicable to luminaires located at or near the side of relatively narrow roadways or paths, where the width of the roadway does not exceed 1.75 times the designed mounting height.

 

Type III Distribution

Type III-01

Type III ligting needs to be placed to the side of the area, allowing the light to project outward and fill the area. This produces a filling light flow.

Type III light distributions have a preferred lateral width of 40 degrees. This distribution is intended for luminaires mounted at or near the side of medium width roadways or areas, where the width of the roadway or area does not exceed 2.75 times the mounting height.

 

 

Type IV Distribution

Type IV-01

The type IV distribution produces a semicircular light meant for mounting on the sides of buildings and walls. It's best for illuminating the perimeter of parking areas and businesses. The intensity of the Type IV lighting has the same intensity at angles from 90 degrees to 270 degrees. 

Type IV light distributions have a preferred lateral width of 60 degrees. 

 

 

 

Type V Distribution

Type V-01

Type V produces a circular distribution that has the same intensity at all angles. This distribution has a circular symmetry of candlepower that is essentially the same at all lateral angles. It is intended for luminaire mounting at or near center of roadways, center islands of parkway, and intersections. It is also meant for large, commercial parking lot lighting as well as areas where sufficient, evenly distributed light is necessary

 

  

 

 

Products

Surface

Surface Product-01

Wall luminaires with a selection of beam distributions for various downward or upward lighting requirements. Desigend to illuminate the wall surface and areas. They are suitable for many applications such as residential and pedestrian areas, shopping malls, parks and gardens. This product is also suitable for commercial use in historic or modern architecture, interior and exterior applications. 

The luminaire is rated as CLASS I with integral driver, available in symmetrical narrow, medium wide and asymmetrical light distribution for types II, III and IV. Color temperatures include; 2700, 3000 & 4000 Kelvin. LED CRI>80 with a lifetime greater than 50,000 hours. 

Low copper content die-cast aluminum housing and frame. Stainless steel screws. High efficiency PMMA lens. Durable silicone rubber gasket and clear vandal resistant glass. Single cable entry. Housing is treated with a nickel and zinc phosphate powder coating. This helps to ensure corrosion resistance.

Cutsheets, IES files and photometrics can be found on the Tango surface mount page 

 

Ceiling 

Ceiling Product-01

A range of cylindrical and square surface mounted exterior downlight luminaires. The Tango ceiling luminaire is suitable for indoor or outdoor applications. Ideal for use in residential, shopping and public areas as surface ceiling downlights. The luminaires have features such as long life, limited maintenance and constant lifetime performance. 

The luminaire is rated as CLASS I with integral driver, available in narrow, medium and wide symmetrical distributions and asymmetrical distributions type II, III and IV. Color temperatures include; 2700,3000 & 4000 Kelvin. LED CRI>80 with a lifetime greater than 50,000 hours.

Low copper content die-cast aluminum housing and frame. Stainless steel screws. High efficiency PMMA lens. Durable silicone rubber gasket and clear vandal resistant glass. Single cable entry. Housing is treated with a nickel and zinc phosphate powder coating. This helps to ensure corrosion resistance.

This fixture also has a mounting ring accessory in order to make the Tango semi-recessed.

Cutsheet, IES files and photometrics can be found on the Tango ceiling mount page

 

Pendant 

Pendant Product-01

 The Tango pendant luminiare with a selction of beam distributions for various downward lighting requirements. The Tango is unique as it is available with Type II, III, IV & V light distribution options that facilitates wider spacing and even light distribution betwen the light fixtures, providing higher energy savings and reduced installation costs.

They are suitable for many applications such as; residential and pedestrian areas, shopping malls, parks and gardens, as well as commercial areas, historic or modern architectural interiors and exteriors. 

The luminaires have features such as long life, limited maintenance and constant lifetime performance. The luminaires use a high quality LED source with low energy consumption and long service life that is greater than 50,000 hours. 

The luminaire is rated as CLAS I with the high power LED integral driver. Low copper content die-cast aluminum housing and frame. Single cable entry. Housing is treated with a nickel and zinc phosphate powder coating. This helps to ensure corrosion resistance.

Cutsheets, IES files and photometrics can be found on the Tango pendant mount page 

 

Post Top  

Post Top Product-01

 Tango post top luminaire was developed to complement the range of Tango and Jet product lines. Using energy saving LED modules, this rectangular profiled luminaire is mounted on a square aluminum pole. Available with different lens optics for symmetrical and asymmetrical light distribution. Designed for residential and shopping areas, parking lots, squares and parks. The LED luminaires have features such as long life, limited maintenance and constant lifetime performance. 

The luminaire is rated as CLAS I with integral driver. Color temperatures available include; 2700, 3000 and4000 Kelvin. The Tango has an LED CRI>80 and liftime performance greater than 50,000 hours. 

Low copper content die-cast aluminum housing and frame. Stainless steel screws. High efficiency PMMA lens. Durable silicone rubber gasket and clear vandal resistant glass. Single cable entry. Housing is treated with a nickel and zinc phosphate powder coating. This helps to ensure corrosion resistance.

Cutsheets, IES files and photometrics can be found on the Tango post top page

 

 

 

Options and Accessories

 

Surface Conduit Entry 

The Tango is available with surface conduit entry for the ceiling and surface mount luminaires. Available in 1/2" or 3/4" sizes customized to accommodate 1 to 4 conduit entries.   

 Surface Conduit for Tango Ceiling 

Tango SCE Ceiling

  SCE ENtries-01 

 

 

Surface Conduit for Tango Surface 

Tango SCE SurfaceSCE Entries Sqr-01 

 

Mounting ring for semi-recessed ceiling - A80281

Mounting Ring Semi Rec-01

 

 

 

 

 

 

 

Share this product